Slide N Lock Tie Downs
The Slide N Lock Tie-Down system is the ultimate way to secure any type of payload in your truck or trailer. It’s so very simple but it works amazingly well. I had a set of Slide N Lock mounted in the original truck bed of my F-250. I was extremely grateful that the Bloomfield Manufacturing company offered up another set since the old set was left on the factory bed when it was removed and sold. They were incredibly convenient whenever I was carrying large, loads that did not fill the bed. With them, I could secure almost anything from one side, the other or from both sides. Literally slide the ring assembly down the track, lock it in place and hook up the cargo straps.
This versatile tie-down system is incredibly simple and effective. With self-locating holes placed every 5 inches, you can position the tie points where you need them in seconds. Simply pulling the spring-loaded locking pin allows you to slide the tie point smoothly and easily to the specific locating hole you want. The rugged strength of Slide N Lock assures you of a tie-down system capable of securing extremely heavy loads. Slide-N-Lock installs in minutes using 1/4″ diameter bolts spread approximately every 10 inches in pre-drilled holes.
- Construction: 6061-T6 extruded aluminum rails and stainless steel slides.
- Capacity: 1000 lb. per tie-down point.
- Available in 93″ lengths for full-sized truck beds, 68″ lengths for short bed vehicles, as well as 22″ & 7″ lengths for SUV’s or other small spaces.
The Slide N Lock system has been unbelievably invaluable over the years and I would never think of owning a truck that does not have a Slide N Lock set installed.