Wrangler Power Products Jumper Cables
When it comes to basic emergency equipment that everyone should have in their vehicle, jumper cables are at the top of the list. Thanks to the great folks over at Wrangler Power Products, Project Responder has some of the best jumper cables available. These jumper cables are custom made with 2ga marine grade wire. What makes these so great is the fact that they are designed as a quick disconnect configuration. The connector plug is inconspicuously mounted below the bumper and covered with a protective snap on cover. The jumper cables then run back to the battery, in this case, a long, long way.
The jumper cables have the standard red and black clamps on one end and a quick disconnect coupler on the other. The coupler even has small red and green LEDs to indicate a proper connection on the disabled vehicle before connecting to the truck. This is a great feature that will prevent crossing the wires and harming the electrical system of either vehicle. The jumper cables are 25 feet long, making it possible to to jump start a car or truck along side the highway without the need to park Responder in harms way or in off the highway’s shoulder. All that is necessary is connect the clamps to the disabled vehicle, walk back to the truck and plug in the jumper cables. The hood does not need to be opened, nor does the battery need to be accessible. This is especially important since the batteries were under the service body.
Jumper cables are a must have and these jumper cables are state of the art. I am very thankful to Wrangler Power Products for their support and their great products.