Project Responder Police Lights HeaderProject Responder Ford Truck header

Sub-Navigation

Slide N Lock Tie Downs


The Slide N Lock Tie-Down system is the ultimate way to secure any type of payload. This versatile tie-down system is incredibly simple and effective. With self-locating holes placed every 5 inches, you can position the tie points where you need them in seconds. Simply pulling the spring-loaded locking pin allows you to slide the tie point smoothly and easily to the specific locating hole you want.

The rugged strength of Slide N Lock assures you of a tie-down system capable of securing extremely heavy loads. Slide-N-Lock installs in minutes using 1/4" diameter bolts spread approximately every 10 inches in pre-drilled holes.

  • Construction: 6061-T6 extruded aluminum rails and stainless steel slides
  • Capacity: 1000 lb. per tie-down point.
  • Available in 93" lengths for full-sized truck beds, 68" lengths for short bed vehicles, as well as 22" & 7" lengths for SUV's or other small spaces

Webmaster's Note: We had a set of Slide N Lock mounted in the original truck bed of our F250. We were extremely excited that the Bloomfield Manufacturing company offered us another set since we left the old set on the bed when it was removed and sold. The Slide N Lock have been unbelievably invaluable over the years and we would never think of owning a truck that does not have a set of Slide N Lock in the bed.

 
Sponsored by:

Footer